News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

What are they worth

Started by weddo, October 05, 2009, 01:21:20 PM

Previous topic - Next topic

weddo

I have been offered some spares by a retired motor mechanic having a clean out and he asks for an all up lump sum.
NOS Crown Wheel and Pinion (standard), NOS fuel pump with glass, NOS Universal joints, NOS water pump
Reconditioned Head (no hardened valve seats) Reconditioned radiator, Vacumm wiper motors, and lots of other second hand bits and pieces.
What would be a fair price to offer?

Regards
Weddo

EffCee

Probably the best rule of thumb is "what are they worth to you" as the buyer. If you feel that they are worth "X" and are happy to pay "X" then that's what they are worth.

There is no sense in offering an arm and a leg for parts that you may never use. I understand that parts are getting scarce and as such proably everyone hoards parts that "might come in handy one day".

Best to ask your self, what are they worth to me, am I going to use them, what do I need now, and what are the parts that I am going to need and use worth? Then you will have a fair idea of what you need and want and what is a fair price to offer, the rest if included is a bonus.


Keith
Canberra, ACT

F4+ ;)

mcl1959

Reco head & radiator alone should make this a pretty good pick up if you can get it for a reasonable amount - If he has no desire to do you a real favour, I would imagine a price around $400 for this lot as being fair. He could want more, he could want less, but maybe this would be a rough guide to start thinking around.

Hope this helps   Ken

weddo

Have had a look at the crown wheel and pinion, can someone confirm if the numbers are correct
Crown wheel    7407396 LC  also engraved over what seems is white paint 98330 with a B stamp beside
Pinion             7408405 LC

thanks in anticipation

Regards


Weddo

mcl1959

Individual part numbers are not listed - the part numbers you have supplied are not even listed in the parts book. The part number in the book is 7406081 which is for a ring gear and pinion assembly

weddo

Thanks mcl1959, that is the number on the box and both items are wrapped in the original grease paper with a card divider between them so I can anly assume they are original.

regards
Weddo