News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

rear brake cylinder size

Started by fcdunedin, September 29, 2009, 04:59:54 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

fcdunedin

September 29, 2009, 04:59:54 PM
Hello i'm having similar problems as kelnic in another post,took car for roadworthy(warrant of fitness nz)after the winter storage and rear brake cylinders are also rusty/corroded i am going to replace both sides and am wondering what size dimension wheel clinders/pistons etc they are as i want to get the right size part the first time rather than taking back to the shop the wrong size part any help would be much appreciated,thanks in advance.

mcl1959

#1
September 29, 2009, 06:12:07 PM
Standard FE & FC is 1 and 1 / 16th of an inch

Ken

fcdunedin

#2
September 30, 2009, 01:03:56 PM
Excellent thank you Ken,will go and order some today.Thanks for the input.

FX1975

#3
September 30, 2009, 05:55:05 PM
I had a recurring issue with rusting brakes as well until I had the cylinders sleeved with stainless, has been good for several years now
                           cheers
                                Frank 
Print
Go Up Pages1
User actions