News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

FE Dog leg

Started by Ed, September 28, 2009, 03:38:47 PM

Previous topic - Next topic

Ed

Hello all,

While replacing a rusted out dog leg on an FE, I noticed it was only single skinned (outer only)

There is an area behind the dog leg which appears to be designed to catch water.  A small 1cm deep trough behind the dog leg with no drain.

The wagon from memory had an inner and outer skin and no exposed trough area.

So ...do some cars have outer an inner layers or...???

Just out of interest.

Cheers

Ed
in the shed

mcl1959

I could write a novel on this question. Early FE's had a problem with structural integrity and as such rear screens would pop out occasionally and body sag could occur causing the rear doors not to close. This was fixed with a number of new panels being inserted into the later FE's. One of these new panels was the double skin on the dog leg. Date was about March 1957.

Ken

Ed

thanks for the info Ken,

as usual, always interesting and informative.

Cheers

Ed
in the shed