Holden Letters on Bonnett

[KFH]

Can anybody tell me what is the correct method to remove the "HOLDEN" letters from the bonnet without breaking the spigots off the back of them.

Thanks

Keith

[zulu]

Very carefully, the lower one is only a locating pin, the top one is jammed in to a little clip for want of a better word, just work around it slowly with a feeler gauge or similar, whatever you can fit in there

You can buy new sets from Rares, make sure to get the clips as well

[CraigA]

I spray them with WD-40 first to loosen the clip/pin which is always corroded.

Then put a piece of twine or string behind the letter and carefully wiggle it off.