News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

HQ-HZ Chassis Swap

Started by fastjbav6, September 23, 2009, 10:59:19 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

fastjbav6

September 23, 2009, 10:59:19 AM
Hi Guy's,
Does anyone know if a Panel van or well body ute chassis is the same length as a one ton chassis and can it replace the one ton chassis? I know the one ton chassis is different on the side just behind the cab.

Regards Seb
Yellow Knight
             

FC427

#1
September 23, 2009, 11:01:14 AM
One ton chassis is longer won't fit the Ute or van .......FC427.....
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

fastjbav6

#2
September 23, 2009, 11:11:06 AM
Thanks for the speedy reply. So I assume the one ton cab can be fitted to the P/V chassis, shorten the tray and brace the side behind the cab?

Seb
Yellow Knight
             

FC427

#3
September 23, 2009, 11:23:42 AM
That is correct I have done a few like this in the 70's when it was impossible to get a one ton chassis you can leave a fair bit of overhang with the tray on the Ute Van Chassis .......FC427......
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

fastjbav6

#4
September 23, 2009, 11:46:52 AM
Many thanks.

Seb
Yellow Knight
             

mcl1959

#5
September 23, 2009, 07:12:56 PM
Without wishing to offend - can we please keep non FE FC related stuff off the discussion boards?


Ken
Print
Go Up Pages1
User actions