News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Brake question

Started by jasonr70002, September 17, 2009, 10:08:14 AM

Previous topic - Next topic

jasonr70002

Hey fellas this might be a bit left field but can you fit/adapt the 4 piston volvo brakes and calipers to fit HR disc front end?
Golden Holdens FE-FC

Glenn 'Stinky' Stankevicius

Anything is possible with enough time and money  ;D I think some Torrie boys were messing around with the idea on the gmh-torana forum, not sure if it got off the ground though, might be worth a hunt.

mcl1959

Having designed lots of brake kits, of course it's possible. The problems you face are having to make up a set of custom hubs and a special bracket to suit the caliper mounting bolts.

In essence a brake kit needs the offset adjusted to suit the rotor and the caliper positioned so it will clear the steering and suspension components.

Ken