News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Alternator for grey motor

Started by FCman, August 01, 2009, 10:22:52 PM

Previous topic - Next topic

FCman

G/day all,can someone advise as to which alternator(model) to use on grey motor, also mounting bracket and what ever else I need to make it work.

Thanks fcman
Sunshine FC

thee

ea falcon bosh or xf just use a spacer beetween original rear mount and longer bolt remove front mount from block and use a shorter spacer or some washers use belt 11a0915

mcl1959

Any alternator with a built in regulator is OK to use. Late Holden, early Commodore will be fine as well, basically any Bosch units are the best and most reliable. Nothing will bolt straight in but adaptation with spacers etc is pretty easy.

Ken

Omalley

I got a sigma one on mine works a treat

thee

yes but with falcon bosch no welding or changes to original mount is needed as with 2 legs line up of belt running true is easy as it uses original bolt line alternator is suported each end  less work

FCman

Thanks for the info guys,I`m off to the wreckers.
fcman
Sunshine FC