News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Carbs, not the ones you eat

Started by Fc1958, July 25, 2009, 07:08:35 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Fc1958

July 25, 2009, 07:08:35 PM
Anyone got any info on what carby was used in an fc and/or info in rebuilding one / info on where to buy a rebuild kit eg needle/jet etc etc
“Old Holdens never die… they just go faster!”

mcl1959

#1
July 25, 2009, 11:53:26 PM
Look for 23-105D on the air horn. This is the FE FC carby.  Repco should have rebuild kits available. Certainly carby shops would have them

Ken

Fc1958

#2
July 26, 2009, 03:34:25 PM
hmm air horn?
“Old Holdens never die… they just go faster!”

mcl1959

#3
July 26, 2009, 03:49:24 PM
The top piece above the fuel bowl. You will see some numbers stamped in the casting right at the front.

Ken
Print
Go Up Pages1
User actions