News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

front Coil Springs

Started by Maco, July 07, 2009, 09:34:22 AM

Previous topic - Next topic

Maco

Hi All,

Can anyone please advise me the free length (not fitted to car) of the front coils springs for a FC special sedan ??? ???

Thanks
John ;)
Better in Green

Rusty_T

 ;)

John,

Speak to the guys at Wholesale Suspension on Coreen Ave.

Cheers Rusty

zulu

John, not sure if it is any help, but I have the front springs out at the moment Part # 7410727 to suit FC Special & Standard Wagon, Panelvan, Ute and they are 295mm long

I also have a pair of FB EK Heavy Duty front springs out & they are Part # 7412465 Optional to suit all FB EK and they are 315mm long & thicker

Do you want a lend of my hacksaw  ;D

Cheers, Gary

PS If anyone else has any springs floating around (spring is in the air) the part # for the spring John needs the size of is Part # 7408860 & it can be found on the top edge of the spring near where the coil flattens out

Rusty_T

 ;)
John,

I will be pulling the springs out of 2 front cross members soon. I'll match them and measure them and let you know the lengths and any differences.

Rusty

ACE

John, I just checked some new old stock springs part number 7408860 and they are 32cm ;)
Regards ACE  8)

Maco

Hi All,

Thanks for your reply,

Gary, thanks for the offer of your hacksaw.

Rusty, thanks for your offer.

Ace, thanks for your measurement of 32cm.

The ones I have on the floor there are 35cm long, I believe the ones in car have been cut, will check in the course of time.

John
Better in Green

mcl1959

You can check really easily what they are out of. Look carefully around the edge at the shaped end of the spring and you will find the part number.

Ken

Maco

Ken,

Thanks will check tomorrow, they don't appear to have any flats ground on them ??? ???

Cheers
John
Better in Green

zulu

The no is on the closed end of the coil John, it may need a wire brush to clean it up


Maco

Gary,

Have checked for numbers on the coil, I am unable to find any numbers at all after wire brushing both ends. May be the coils are after market ???

John
Better in Green

mcl1959

John, if they have no flats ground on them then they certainly are not genuine - I wouldn't use them anyway as the spring wont sit square in the tower without a flat end.

Ken

Maco

Ken,

Thanks for your advise.

John
Better in Green

Maco

Thanks to all who assisted me with advice & assistance.

# 7410727 sedan spring is 300 long (free Length) x 117 OD x 14.2 gauge dia. x 8.1/4 turns.

Cheers
John ;)
Better in Green