News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

v6super charged

Started by merce36, July 03, 2009, 11:10:44 PM

Previous topic - Next topic

merce36

Hi I have a v6 super charged motor and turbo 700 out of a vx comodore (complete)I am hopeing to put in my fc ute.Can any body help me with any info with any do's and dont's?I was told by a auto elec that it will be easier to use an auto trans out of an old vn.IS THIS RIGHT?i Have a crs frontend.Does the sump have to be changed?Any information would be apriciated.Cheers John

FC427

I have just about finished a VT and T700 into a HT Van I got the sump and pickup from Pat Gardiner V6 conversions and he was very helpful so I also bought his wiring harness for the conversion made the job a lot easer and cheaper than getting an Auto Electrician  in to do the job .....my advise would be to ring him and have a talk about any issues you have .......FC427......
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

ratbox

i'de do as FC427 says and talk to pat gardener, not sure you can use the early box with the later engine/computer though 

fcv85l

easier to use complete engine trans combo,just need bcm bypass from pat gardiner and use electronic speedo