News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

RE; WHICH DISCS\STUB AXLES

Started by BRAD GILBERT, June 13, 2000, 12:00:00 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

BRAD GILBERT

June 13, 2000, 12:00:00 PM
CAN ANY ONE TELL ME DO COMM DISCS FIT ON TO HR DISC STUBS.ALSO DO COMMODORE CALIPERS BOLT ON TO THE STUBS IM USING ROD HADFIELDS F/END AND TORANA RACK

Ken McLean

#1
June 18, 2000, 12:00:00 PM
No HR is 13 inch, Comm is 14 inch.  If u buy Hadfield dropped spindles, then u can do the conversion, because they have 2 sets of caliper bolt holes, 1 for 13 inch and 1 for 14 inch.

FEV008

#2
June 20, 2000, 12:00:00 PM
ever considered using HQ discs?

Scott

#3
July 17, 2000, 12:00:00 PM
Leylan P76 disks fit the best and the Hadfield kit has the conversion parts to suit....the disks are narrower and are the same stud pattern as ford disks so the wheel sit further into the guard which makes it better for steering than the holden option
Print
Go Up Pages1
User actions