News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Ignition Switch - Accessories

Started by Rod, May 19, 2009, 12:32:27 PM

Previous topic - Next topic

Rod

In following up a previous post on electronic ignition I would like to ask a question to the knowledgable people out their about the ignition switch. An electronic module I am looking at can heat up along with the coil if the motor isn't running causing damage to those parts. As you know from time to time we test / use our accessories without the motor running. Is there another switch that can be fitted to the ignition (possibly a latter model) which has a true accessories position? The switches we have do have an accessory post but my understanding that this is not a true accessory function as we have come to expect- power still goes to the coil. Are there any other solutions. The best bet I suppose would be to run the radio, heater and other accessories off the live power at the back of the light switch. Would just need to remember to switch them off when turning the car off. Anyone got any thoughts.

Cheers Again

Rod

FC427

As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

CraigA