News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

FC fins on a wagon

Started by Johns, April 24, 2009, 02:36:18 PM

Previous topic - Next topic

Johns

Hi all.

Has anybody test fitted a set of FC fins on a wagon? Clearly they don't fit or I'd have seen one with them. I'm wondering how different the mounting profile is or are they too long? (If I had a set I'd try myself :P)

Cheers
John
Now that I've got the beige with the grey, I'm looking for the cream, the bone, the ivory and the off white

CraigA

I've got a set you can try - for what reason I don't know.  :-\ :-\

Are the drugs wearing off again?

mcl1959

They don't fit by a long way John.
Tried them to see if they could fit a number of times.

Ken

Johns

Thanks Ken, I thought as much.

Craig, with the extreme speeds Thelma is soon to be capable of my thought was that the fins should assist high speed stability. I did look at grafting a retractable Porsche spoiler into the roof, but that would have meant cutting the original hoodlining.......

Cheers
John
Now that I've got the beige with the grey, I'm looking for the cream, the bone, the ivory and the off white

RET

Quote from: Johns on April 24, 2009, 08:36:06 PMI did look at grafting a retractable Porsche spoiler into the roof, but that would have meant cutting the original hoodlining.......

Have you considered the poor man's option of just hooning around with the top tailgate open? ;D
OurCarClub.com.au is a web-based data management application, custom built for car clubs and their volunteer officials. More info...

NosFEratu

definitely the more cost effective option and all he'd need is a cheap face mask for all the fumes that get sucked back in  :D 
NosFEratu

FE_STD_WAGON

No need for a face mask just take out the front screen more aerodynamic and variable a/c [faster you go]  ;D

Mick

RET

Quote from: FE_STD_WAGON on April 25, 2009, 07:57:09 PMjust take out the front screen

Again though, not real good for the headlining ;D
OurCarClub.com.au is a web-based data management application, custom built for car clubs and their volunteer officials. More info...

Spinner

They will fit, with a bit of grinding, as the profile of the upper quarter panel is different between a wagon/van/ute and a sedan.

One thing to be wary of, one of the mounting bolts sits right over a panel seam.


Cheers

brett
(0414) 49-6706.  d5461 on Ebay.

Glenn 'Stinky' Stankevicius

Paul Roberts FC Station Sedan (Yellow, SA Club) has the sedan fins installed.

FC229

I always liked the idea of putting FB rear guards on an FC, not too sure how it would go though!
Anyone ever seen it done, or anyone good enough with photo shop to throw one together?

jezz

one of the WA Club from Mandurah has a pale green delivery van with EK fins, may be some pics on the site here somewhere... if that helps.
Jezz

jezz