News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Dash Panel Lamps/Globes

Started by Maco, April 21, 2009, 07:01:05 PM

Previous topic - Next topic

Maco

Hi,

I need some info on the correct/globes for the dash instrument panel.

1. size

2. wattage

3. quantity required.

Any assistance is greatly appreciated.

Cheers
John ??? ???
Better in Green

RET

There are 3 tell-tales, 1 each for fuel and tell-tale clusters, 1 each for indicators, 2 for either side of speedo and 1 for high-beam. Which by my reckoning makes 10. All of these are rated at 2CP (candle-power), except the high-beam, which is 1CP. 2 CP is about 38 milliwatts, but CP and watts measure different things (output vs input), so I'm not sure how useful that is.

They're standard bayonet-fit globes. Holden's part number is 127934, but that's unlikely to be helpful.

That any good to you?  :-\

RET
OurCarClub.com.au is a web-based data management application, custom built for car clubs and their volunteer officials. More info...