News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

corect tailshaft

Started by njf690, April 14, 2009, 07:58:35 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

njf690

April 14, 2009, 07:58:35 PM
doing the v6 conversion with vn diff shorten to suit , what is the corect tailshaft to use in this case?

FX1975

#1
April 15, 2009, 02:24:43 PM
Your best option would be to speak to a driveshaft specialist and see what they recommend Sydney driveshafts do a good job though I can't seem to find their no.
                               Hope this helps
                                         Frank

mcl1959

#2
April 15, 2009, 02:56:52 PM
Do you mean should you use the 2 piece tailshaft or a one piece tailshaft?
If so there is no problem using a 1 piece tailshaft.

Or do you mean what length do you need?
If so you need to measure from the end of the gearbox to the flange of the diff with weight on the wheels, and supply this to a tailshaft specialist as described and they will make one up for you.

Regards  Ken
Print
Go Up Pages1
User actions