News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

The New Project

Started by Rusty_T, March 23, 2009, 12:45:00 PM

Previous topic - Next topic
Print
Go Down Pages 1 2 3 4 5 6
User actions

zulu

#60
April 25, 2011, 11:53:57 PM

Starting to shape up Rusty, how is the engine going, are you far off putting it in?

Rusty_T

#61
April 29, 2011, 09:45:42 AM
 ;D

Gary,

I'm going to try and drag the motor out this weekend and check it over. I will get a top end gasket kit into as well and order a bottom end kit while I'm at it.

Russ

Rusty_T

#62
May 08, 2011, 03:53:15 PM
 ;D ;D

Hi all,

Guards are done and back on the ute, and look pretty good (from a distance) and the new peak is pointing in the same direction as the good one. Yip yah!!! Doors will be started and hopefully done tomorrow as there isn't very much to do on them. I will put the pics up after work tonight. The light at the end of the tunnel is getting brighter.

Cheers Rusty

Rusty_T

#63
May 08, 2011, 11:02:19 PM
 ;D ;D

Well here we go. Some of the left guard pics and what's to be done with the doors.

Head light cap fitted. Dam terrible job.



The finished bit



As you can see the doors are pretty good.







I'm going to put it out the front over the next few days and photograph it with its brothers.

Cheers Rusty

Rusty_T

#64
May 11, 2011, 06:23:00 PM
  ;D :o :o :o

Put the brothers out to play today. It's been 2 years since the youngest has seen the outdoors. Won't be much longer and they will all be playing on the road. Enjoy











The older and more wiser of the 3 is the sedan, next is the wagon (Rosalyn's) and the youngest by 12 months is the ute.

Cheers Rusty

FC427

#65
May 11, 2011, 06:29:29 PM
Nice  one [three] ;D ;D ;D Rusty ...FC427....
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

DN2168

#66
May 11, 2011, 07:44:29 PM
Looking good Rusty. Panno next  ;D.

Dean.

EffCee

#67
May 11, 2011, 08:27:30 PM
Looking Good Rusty,

Keep up the great work

Keith
Canberra, ACT

F4+ ;)

ekute

#68
May 11, 2011, 08:56:29 PM
Geez Rusty you must have lotsa garages.Lookin good-I have my Fe sideways in the garage and the Kombi, Beemw and Ducati in there as well as the other shit?Congrats on the fine stable!

Rusty_T

#69
May 19, 2011, 04:01:18 PM
 ;D ;D

Hi again all,

Over the last 2 days I have made a little more progress on the beauty ute. I have stripped the bonnet back to its bare r's. And what a sight. It looks like it is covered with freckles (of Rust, not sun, spots).However, with some very intense rubbing it came up nicely. It was rust treated and painted in red oxide. The doors ( inside ) were cleaned out and also done in oxide. Next, the rust was remove from the spare wheel door and repaired. It is yet to be finished, tomorrow (depending on the GOC home command). Here are the latest pics.











Rusty_T

#70
May 22, 2011, 04:52:42 PM
 ;D ;D

Hi all,

A little bit more done yesterday and today. Tail gate and spare wheel door on and fits pretty well. Progress is looking good.



I'm going to attack the doors tomorrow, however I am a little hesitant as I don't want to buckle or stretch the things when I plate them, specially the outer skin. Advice in this area would be appreciated.

Cheers Rusty

Old_Mt_Isa_Boy

#71
May 22, 2011, 06:35:05 PM
Nice patch job on the spare wheel door. It is looking the part rusty. :)

Regards

Wayne B

Ed

#72
May 23, 2011, 09:43:56 AM
Quote from: Rusty_T on May 22, 2011, 04:52:42 PM


I'm going to attack the doors tomorrow, however I am a little hesitant as I don't want to buckle or stretch the things when I plate them, specially the outer skin. Advice in this area would be appreciated.

Cheers Rusty

Rusty,

Nice work.

MAke sure your patches fit with minimal gap and tack evenly making sure to keep heat down.  As a rule of thumb (or hand)  I always makes sure the panel is kept cool enough to touch with your hand.. if you can't it's too hot, and you will prob get distortion. 

seems to work for me.

Cheers

Ed
in the shed

Rusty_T

#73
May 24, 2011, 02:46:28 PM
 :P :P

One down one to go. I was waiting for that pop noise, never happened. See how I go with the second  and worse door tomorrow. Pics tomorrow as well. Thanks for the advise Ed. Great help.

Rusty

Rusty_T

#74
May 25, 2011, 11:56:58 AM
 ;D ;D
Got to be happy with it. Drivers side door is done and fits the gap beautifully. Here it is thus far.







And the site manager and apprentice had to feature some where as well.





Now the left door to be done. I'll give it a go tomorrow.

Rusty

Ed

#75
May 25, 2011, 02:12:18 PM
you're a pro Rusty... nice job.
:)

Cheers

Ed

in the shed

Rusty_T

#76
May 26, 2011, 05:05:41 PM
 :D :D

Left door done now. What a nerve racking experience that was. Glad it's done though. The doors were  probably the hardest part to do. Rear quarters to do then slap some paint on it and let it sit for a bit. Pics









Happy trails chaps

Rusty

Rusty_T

#77
June 16, 2011, 05:01:15 PM
 ;D ;D

Hi all,

Bit more progress over to last few weeks.

Looking at chrome dash bits and white Steering wheel.





Also put some colour on the roof. It's amazing how much one can't see until it's a bit brighter. I thought I had it nice and smooth. Oh well, it's fun.







Sun visor also copped a little colour.



And both doors are swung as well.

Until the next update

Cheers Rusty

Rusty_T

#78
July 05, 2011, 11:19:33 AM
 ;D ;D

Put the visor on the ute painted the dash in mat black. Came up OK. May even change the colour of the car. Black and White. So simple.





More soon
Rusty

Paul In Ireland

#79
July 07, 2011, 10:14:12 AM
Will you be painting the underside of the visor a darker colour to allow for glare etc.?
The International FE FC Fleet of Ireland
Education is where you read the fine print. Experience is what you get when you don't.
Print
Go Up Pages 1 2 3 4 5 6
User actions