News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Spare wheel door won't open.

Started by utey, October 29, 2008, 05:03:36 PM

Previous topic - Next topic

utey

I can't open the spare wheel door , I made some adjustments so that it looked better  and was tighter ( too tight key won't turn)
Fresh paint so don't want to force, plus wooden floor has been siliconed  down.
Can I drop the tank from the outside?
Any ideas????

Nick
If it was easy would it be so much fun!

FC427

Nick get some one to push on the spare wheel door real hard and you try to turn the key, might just take the load of the lock.......FC427......
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

mcl1959

If all else fails you can drop the tank. Drain the tank and remove the fuel line, then remove all the retaining screws.  Carefully manouvre the neck of the tank out through the side of the car.

Ken

TTV6FC

Isn't the tank screwed in from the top? And under the floor ...???
Run your fingers over my Holden and I'll run my Holden over your fingers!!!!

NascoHunter

Ute and Vans petrol tanks are screwed from underneath and the tank comes out from below.
Just push your spare will door beside the lock and turn the key.
Cheers,
Tony.

utey

Thanks for the help.
I'll drop the tank.
Nick
If it was easy would it be so much fun!