News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Bolt Pattern

Started by spider, December 14, 2002, 01:07:25 AM

Previous topic - Next topic

spider

Hi to all :D,
                   I am wondering if anyone can tell me if the bolt pattern on the back of a grey motor is the same as a red motor, as in 186. ???
Cheer's Spider ;D

FC-V8

Hi Spider
         They are the same bolt pattern,If my memory serves me correctly I bolting a 186 to the original gearbox years ago to my first FC.
Glenn
What it to rev ? install a CHEV !
0401-065-201

craiga

Spider is spot on, the Poo Mobile has Red 149 with original grey 'box - all bolts up no problems. Just don't go giving that big bore 186 too much throttle too quick or you'll have a big mess to clean up  :'(

Cheers,

Craig.

brads59

Hi guys,
Maybe try an all syncro box out of a HQ?
Still a three on the tree,but much more user friendly....
Cheers BRAD............
1959 Black Std sedan

spider

;DThank's everyone,
                                  The reason i asked is i wanted to run a 5 speed toyota box behind the grey motor, and wasn't sure that when i ordered the adaptor kit, if i had to buy a adaptor kit just for a grey but since it is the same as a red motor as in bolt pattern theres no problem :) i will know what to order. Since the grey motor is going to be bombed to the eyeballs and be totally a mongrel to drive on the road [MAGNIFICENT ;D]  I wanted a good manual box behind it plus the bonus of a overdrive.
Cheers Spider

craiga

Brad,

Fitment of later model synchro gearbox's need floor and gearbox crossmember mods - and engineers reports. Better result, and able to safely pull chirpies into second  ;D just more stuffing around.........

Cheers,

Craig.

FE_STD_WAGON

Hi spider

Just a point to remember if you get bellhousing to suit a celica 5 speed to a red motor [which is the same bolt pattern as a grey] it wont have the mounting bolt holes for the rear engine mounts to suit the grey. So I guess I'm saying you'll have to get a bellhousing to suit a grey.

Regards FE STD WAGON

spider

Thanks FE STD WAGON ;)
                                         Now there is a point i would of forgotten all about. Thank's Mate for reminding me of the different engine mount's. I am working on the missus fe that has a 186 and forget that the engine mounts on my grey are different :)
Cheers Spider