News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

EK CROSS MEMBER (SPACER TUBE LENGTH?

Started by ekolden, June 26, 2008, 03:51:13 AM

Previous topic - Next topic

ekolden

HI ALL,
I'M IN THE PROCESS OF FITTING A HR FRONT END TO MY EK.
I HAVE A PROBLEM WITH THE SPACER TUBES,I ONLY HAVE HR ONES
AND I HAVE RED SOMEWARE THAT I WILL NEED TO USE THE EK ONES.
CAN ANYBODY GIVE ME THE LENGTH OF THE EK ONES ?
I THINK THE FRONT AND REAR ONES ARE A DIFFRENT LENGTH?
AND ALSO WHAT H/D SWAY BAR WOULD FIT THE EK WITH THE HR F/END?
THANKS--EK

Glenn 'Stinky' Stankevicius


mcl1959

You do need to use the EK tubes but I don't know their length. But I do know that the sway bar to use is the EK one. It is the same distance between the eyes as the HR one but does not have the dip in the middle.

Ken

ekolden

THANKS KEN,
I DONT KNOW WHAT I WOULD HAVE DONE WITHOUT YOUR HELP
OVER  THE YEARS WITH MY EK,PROBABLY BE OVER ON THE FB-EK FORUM WITH ALL STINKY'S FRIENDS. ::) ::) lol.
CHEERS--EK.