News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

rollar rockers on ebay

Started by JSM, June 18, 2008, 05:12:08 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

JSM

June 18, 2008, 05:12:08 PM
Has anyone got Experience with the red motor rollar rockers on ebay for about $250, The red coloured ones? Or generic/cheaper rollar rockers in general?
Wondering how they hold up and if anyones had any hassles with this kind of product as they don't look to bad....
Cheers
JSM
On a Mission to fix up my Ute, Five years down so far... hopefully this'll be the last before i can drive her!!!

FC427

#1
June 18, 2008, 05:38:07 PM
They are the Cheap ones made in China [but so is every thing else we buy ] have seen a set fracture at the strip,, and if you had to replace them you would have been better of buying a good set of Yellow Terror in the first instance... It would depend on RPM used , Lift of cam . Valve spring tension , HP and how much use it would get I suppose ,, but when I bought my 1.6 ratio roller rockers I went for Yellow Terror the same as my mate uses in his 7.7 second  Holden Six  .........FC427......
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

JSM

#2
June 18, 2008, 06:38:07 PM
Cheers mate, I figured it might be something like that, just thought I'd check up on the off chance...
JSM
On a Mission to fix up my Ute, Five years down so far... hopefully this'll be the last before i can drive her!!!
Print
Go Up Pages1
User actions