FCRB30 Wagon

[FC427]

just a few smart arsesc--t
hoon

And hear I was thinking
FAT
CAT
HOON
;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D....FC427........

[pedro]

Managed to get a day in today, so I fixed the compressor, bolted down the vice I've had for 25 yrs and never bothered to fit properely because we were always on the move(see I told you I was serious about staying Jack), finished organising the shed then did some work on the inertia seat belt mounts, glad I did after what I found in the pillar





           Pedro

[FC427]

Pedro  have you checked with your engineer for the anchor points  ??? ??? ??? I have done this before and he required more than just a plate I made "C" section from 5mm plate fabricated to the profile that matched the upper and lower  sections of the B pillar cut 4mm groves in the door jams and back welded them before he was satisfied ......FC427.......

[pedro]

Thanks Mark I'll check, in Qld if I'd mounted it to the floor I only needed a 50mm x 75mm x 3mm plate, you can't see it in the pic but that is 5mm plate, I just replaced the seat belt on Mezza's VY and I couldn't believe how weak the mount was compared to what they make us do.
                Pedro

[pedro]

G'day all, finally managed to get a few moments on here, unfortunately my mates have discovered that I'm handy around the house and keep coming up with "small" projects they need help with, with my own reno still ongoing and working carpet laying when I'm needed even my weekends are taken up now, anyway enough whinging the engineer has been away for a couple of weeks so I hadn't been able to check with him till this morning re the seat belt mounts, he was happy with the way I've done them and gave me the go ahead to continue so I can get back to work on the old girl now, Phil at Carpliance has been really helpfull and said to send him some pics of the rear seat and pillar setup and he will throw a few ideas around re the best way to mount the rear seat belts in a wagon.
                   Pedro

[pedro]

bet you can't top my fathers day, a card from my wife with a wad of cash in it and a message telling me to take some time for myself and work on my car, got a grin from ear to ear today ;D ;D ;D,
      Pedro

[snuff69]

Gotta be happy with that Pedro. Now make sure you do as your told  Dave

[DN2168]

Good on ya Mez, you're a legend :-*

Dean.

PS. Hi Pedro  :P.

[pedro]

Now make sure you do as your told

First time in my life I'm happy to do what I'm told ;) ;D ;D

G'day Dean, how's your eye.

Jack i know i promised you a few weeks back that i was going to get back to work on the wagon but i really do have a good excuse this time, not long after i made that comment i had a P-plater pull out from a give way sign right in front of my work van, I T-boned him and smashed up the front of the van and it's been a pain in the rectum lately    trying to dodgy up the van so i can work and dealing with insurance companies, anyway there "WILL" be a progress report before the end of this week.
               Pedro

[Old_Mt_Isa_Boy]

Will be great to see a progress report Pedro.

PS Nice fathers day gift.

Regards

Wayne b

[pedro]

Will be great to see a progress report Pedro.

Thanks Wayne it's great to be able to make some progress, my timing is right for once anyway work has died off at the moment so I'll be able to get stuck in this week, and yes Dean i think Mez is a legend too, just shows even after 32 years together they can still surprise you.

installed the flouro's i took out of the house into the shed over the weekend



made a decent size bog board this morning



then back to my favourite job ::)





Roof wasn't as straight as i thought



                  Pedro

[DN2168]

Just remember pedro.....you always feel better after a good bog ::)
Dean.

[pedro]

Just remember pedro.....you always feel better after a good bog

;D ;D Yeah but it's a crap job ;)
           Pedro

[FCRB26]

Good luck rubbing looking good.

keep on rubbing.

[JB]

So the race starts again... Lol!

[pedro]

keep on rubbing

Rub rub sand sand rub rub sand sand rub rub sand sand rub rub, I still hate bogging  :( :( :D

Insert Quote
So the race starts again... Lol!

Not much of a race at the moment JB, three days on one panel that means I'll probably be finished around christmas-----2014  ::) ;D ;D

I went and saw the local painter yesterday to get a quote on him doing the bogging but he was booked up months ahead, lucky i did though because he told me what i was doing wrong, I was filling a low spot then sanding which created another low spot so i was going around and around in circles as each layer of bog can be harder or softer than those around it, he said to get it as straight as i could then skim coat the whole area, two coats and it was done ;D, I will put up pics later to show what i did, unfortunately photobucket is down at the moment.
          Pedro

[weddo]

"I'll probably be finished around christmas-----2014 "...........just in time for Tassie!!! ;D ;D ;D


regards

Weddo

[pbh0069]

hi Pedro
looking good, i am just starting to bog as well ( yeah i know HA HA ) and having the same problems
would like to see photos as soon as you can load them

cheers Phil.

[Ed]

Ive started using one of these piston sanders before finishing up by hand.

http://www.diytools.com.au/Straight-Line-Dual-Piston-Sander.html

[FC427]

Ive started using one of these piston sanders before finishing up by hand.
;D ;D ;D ;Dhttp://www.diytools.com.au/Straight-Line-Dual-Piston-Sander.html

Ed they are OK but slower than doing it manually if you get a chance try a Rupes electric stroke sander  ;D ;D ;D ;D ;D ;D.....FC427......