News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

standard radiator

Started by paddyfc58, April 29, 2008, 08:13:15 PM

Previous topic - Next topic

paddyfc58

hi all, will the standard radiator do the job sufficiently for 186 motor/engine ;D,will be using a thermo fan not sure what size , any recommendations/ hints???

thanks paddy

FC427

Hi Paddy I use to run a stock 186 with the standard radiator and a 16''electric fan and had no issues with overheating but my radiator was in top condition ......FC427......
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

paddyfc58

hi, thanks for reply with your 16" fan how did you have it mounted front or back of radiator and does it attach through the radiator like a trimatic oil cooler?? am looking at 16" fan on ebay at moment

thanks paddy

FC427

 Paddy I had it front mounted and made mounts for it off the radiator support panel.......FC427.......
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

paddyfc58

thanks for the info FC427 that will most likely be my set up