News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

FC P/van numbers

Started by kleetus, June 05, 2008, 04:35:06 AM

Previous topic - Next topic

kleetus

 ???Excuse my ignorance but where exactly do you find the Chassis Number? My Van is in storage and a little difficult to get to so I don't want to shift things around too much looking for it. BTW the reason I'm asking is I came across the serial numbers the other day I had written down and 'filed' but I didn't know then there was a seperate Chassis No. For your records
Body: 2 04-10008-A
Trim: 194-653
Paint: 256-2051

Paul In Ireland

Courtesy of RET:

If it's an FE the stamped numbers are really small, like a quarter-inch high. They'll be between the regulator and the battery, probably along the upper fold in the metal of the inner skirt. They can really take some finding.

FC ones on the other hand are about 3/4" tall, on the flat (horizontal) area of the driver's side skirt, directly opposite the regulator.



The International FE FC Fleet of Ireland
Education is where you read the fine print. Experience is what you get when you don't.

kleetus

 ;)Thanks! I'll have a look this arvo and get back ti you all. Cheeeeeeers!

kleetus

Thanks again for you help Paul.Revised Numbers:
Body: FC 2104-10008-A (10,008th manufactured in Adelaide)
Trim: 194-653
Paint: 256-2051 (Skyline Blue outside and Peasant Blue inside)
Chassis: FC61984M (Melbourne assembled 60,984th FC in 1969)
I now know that the Engine was replaced @ 76,670 miles (cooked her towing huge load of wood!) with another grey from an EK. However the owner chose to use the Oil Bath Air Cleaner from the original Motor (How lucky was that).
My guess then she's a fairly late build and a real "Belmont" trades vehicle. I have since fitted and Air Chief Radio and a Lucas Heater so now she's a "Kingswood"
Cheeeeeeers! Kleetus

mcl1959

Kleetus, yes it is a pretty late van. Do you remember it having 333 on the line under the paint colour?

Ken

kleetus

Yes Ken!
Has 333 under the paint colour. What does that mean????

RET

Regular Production Option 333 was a glazed tailgate. The standard panel-van had an all-steel upper tailgate, i.e. no glass in it at all. I don't know whether it was unpopular, or all the vans without a back window got written off in accidents :o, but original panel vans without this option are very very rare. There's been a lot written on this topic over the years - do a search for 333 or "blind van" and see what you come up with.

cheers
RET
OurCarClub.com.au is a web-based data management application, custom built for car clubs and their volunteer officials. More info...

kleetus

Many thanks RET.
I had never given much credence to researching my Van's history until joining this site, but I am starting to realise that I own a unique and special part of Australian automotive history and should give it more of the respect it deserves. All who have got it up and running should be congratulated.
So! Thank you!
On the down side however, I pretty sure my Van has had it's arse end replaced with that of a Wagon (Rust I guess). It's a different Blue and has a "Station Sedan" chrome badge across it. The Glassed top section however still seems to be the original and even all the locks to hold it up still work! The key to the 'spare tyre' dormitory still works too and is rust free!!! I guess that's all good!
Thanks again. Cheeeeeers!!!!

RET

Kleetus,

It could have had a rear quarter done, but unlikely the whole bum. Wagons don't have the bumperettes and spare tyre door, they have a false floor with the spare wheel well completely internal, just like a modern Commodore wagon.

Thanks for the kind words about the site - it's the number of passionate owners who participate who make it the success it is.

cheers
RET
OurCarClub.com.au is a web-based data management application, custom built for car clubs and their volunteer officials. More info...

kleetus

I'm sorry! By arse end I just meant the Tailgait!!! You guys are very serious indeed!
Again thanks for your interest and site. Cheeeeeeeeeeeer! Kleetus

RET

Sorry - thought you were referring to the die-cast on the rear quarters - that actually says "Station Sedan" - not the tail-gate badge.

Van and wagon tailgates are identical apart than the badge, stainless and interior trim, so completely interchangeable.

RET
OurCarClub.com.au is a web-based data management application, custom built for car clubs and their volunteer officials. More info...

cruiser056

Hi all,
       A question if I may?

       What is the difference in tailgate badges between the Van and Station Sedan?

Thanks

Michael

Spinner

The car they they are fitted to.

AFAIK, they are otherwise identical.


Brett
(0414) 49-6706.  d5461 on Ebay.

peterwmh

Doesn't a van tailgate just say 'HOLDEN' and the station wagon says 'STATION SEDAN', that's how I remember them anyway!!

Peter
Never late with a 308!!!!

cruiser056

Sorry, maybe I have misunderstood, but RET wrote that the badges are different - the tailgates are the same.  Or have I mis read this?

Michael

mcl1959

Tailgate badge for ute, van and wagon are all the same

part number is 7410357

The wagon and van tailgates are also identical - p/no is 7410702

Ken

FC0058

Hi Kleetus
QuoteChassis: FC61984M (Melbourne assembled 60,984th FC in 1969)
QuoteKleetus, yes it is a pretty late van.

I would have to agree with Ken, 1969 is the latest built FC Van I have ever seen  ;D

Hehehehe ::)
Cheers Jim
Forgiveness is easier than permission.

RET

Did I say that? Oh yeah, I did. :P My bad. The van and wagon badges are the same.

Sorry for the confusion.

RET
OurCarClub.com.au is a web-based data management application, custom built for car clubs and their volunteer officials. More info...

kleetus

 :D Ohhhh! Prairie s%^&$t!!!!! A typo!