Deep dish wheels

[brett_f]

Hi gang, need some help! Thinking of putting on some deep dish mags in which the overall length of a standard diff is 4" inches to wide. Is there a diff that will take 13 inch wheels and is 4 inches shorter that will fit up? its holden pattern (of course) or does any one know what the cost would be to get the diff and axels shortened(Melbourne-Vic). Thanks for any help

[2door350]

You can try LJ torana...cant remember off hand how much shorter it is but i think it gives you a few inches...

[brett_f]

You can try LJ torana...cant remember off hand how much shorter it is but i think it gives you a few inches...

Thanks for the help!!

[waynos]

track on lj is 50.8 inches,gives ya what ya need,almost 4 3/4 shorter as long as it wont foul chassis

[brett_f]

track on lj is 50.8 inches,gives ya what ya need,almost 4 3/4 shorter as long as it wont foul chassis

Thanks guys for your help, l thought the torana housing might be the go.

[mcl1959]

I have a Torana housing here with axles - It has had FC mounts welded in and the trailing arms removed - it is all set up to mount into FE FC.  Asking price is $150

Ken

[brett_f]

I have a Torana housing here with axles - It has had FC mounts welded in and the trailing arms removed - it is all set up to mount into FE FC.  Asking price is $150

Ken

Where abouts are you Ken,and what sort of wheels were you running-Width-offset from centre? Sounds like i'll take it thanks

[mcl1959]

I'm in Hoppers Crossing. I was planning on running 7 inch wide rims on my FE with the diff but not going to get around to it.

Ken