News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

chassis number

Started by dwortho, January 30, 2008, 07:07:42 PM

Previous topic - Next topic

dwortho

Hi all
I know this is a daft question, but i have looked all over the engine bay , but cannot find the chassis number anywhere?
so where is it

FC427

If it is a FE take a look for a small number above the battery ......FC427.......
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

sexyfc

if its an FC its on the drivers side in engine bay on the first shelf. In between the 3rd and 4th vertical crease.  Sounds like they have caked the paint on the number.
Project started 16/01/08.

FC427

If you can't find one check to see if the skirt has been replaced due to accident damage .......FC427......
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

dwortho

Thanks chaps
Had a look but cannot see anything,looks like panels have been replaced.car has been registered before so hopefully vic roads can help me.
again many thanks

DAVE W

RET

If it's an FE the stamped numbers are really small, like a quarter-inch high. They'll be between the regulator and the battery, probably along the upper fold in the metal of the inner skirt. They can really take some finding.

FC ones on the other hand are about 3/4" tall, on the flat (horizontal) area of the driver's side skirt, directly opposite the regulator.

cheers
RET
OurCarClub.com.au is a web-based data management application, custom built for car clubs and their volunteer officials. More info...