News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

vacuum washers

Started by rodliz, February 01, 2008, 08:51:50 AM

Previous topic - Next topic

rodliz

can anyone advise me on the hose connections for vac. washers on my fc i.e from control switch to washer bottle and vacuum source...cheers!

mcl1959

Cut hose from fuel pump to wiper motor and insert a tee piece.
Connect hose from tee to inner pipe on switch.
Connect hose from outer leg of switch to top of vacuum jar.
Connect hose from lower outlet on vacuum jar to a tee under the dash.
Connect 2 short pieces of hose from this tee to the squirters. (Note the squirter hose diameter is smaller than the main hose diameter - the tee has one large leg and 2 small legs).

The instructions are clear that mixing the connections on the back of the switch will cause faulty operation.

Ken

rodliz

Thanks greatly Ken ---help appreciated!