News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Starter Motors

Started by KFH, December 31, 2007, 03:01:26 PM

Previous topic - Next topic

KFH

I have been reconditioning some starter motors and generators for my grey motor FC.  I have one starter that has 4 brushes.  The only visual differences I can find is a small amount of blue colour on the solenoid.  What year/model was the 4 brush starter motor first used?  I presume they have more torque than the 2 brush unit.

Keith
I was born with nothing and still have most of it left

mcl1959

What is the model number on the case of the starter?

Ken

KFH

Ken

The full stampings on the motor, which is a Bosch, are:  U-EED 0,8/12 R37
The block is was/is attached is one from an EJ stamping

Keith
I was born with nothing and still have most of it left

mcl1959

The starter you have is from an FB/EK/EJ. The 4 brush system started with this model. The 2 brush starter from the FE/FC has a locked torque figure of 7.75 ft/lb at 350 amps whilst the 4 brush starter achieves 8.5 ft/lb at 280 amps.

Regards  Ken

KFH

Thanks for the information Ken

Keith
I was born with nothing and still have most of it left