News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Diff Pinion Angle?

Started by THOMMO_2, February 25, 2008, 07:40:07 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

THOMMO_2

February 25, 2008, 07:40:07 PM
Gday All
Is the pinion angle the same on early holdens, FE to HR?
If so, what is the angle?
Thanks
Jeff
USE IT OR LOSE IT

FC427

#1
February 25, 2008, 07:50:32 PM
 It is suppose to be the same angle as the back of the gear box if you put a straight edge on the back of the box up and down and a straight edge on the rear yolk up  and down the measurement should be the same top and bottom some say it is good to vary the angle a couple of degrees so it doesn't wear the universals in the same spot but up to you  ......FC427.......
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

THOMMO_2

#2
February 25, 2008, 08:03:34 PM
Thanks FC427
I did know the why's, I just need an angle on a standard diff.
Thanks anyway ;)
USE IT OR LOSE IT
Print
Go Up Pages1
User actions