News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Centre Console in Ute

Started by michaels57, July 18, 2002, 08:03:40 AM

Previous topic - Next topic

michaels57

Hey Guys,
As i gutted the interior in the ute on the weekend i was thinking of putting in a center console that would suit a 4spd and also look good
wondering if it's been done before and what's sought  of console should i use.

REGARDS
Michael
 8) 8) 8)


Jockster

 ;DOn my FC Sedan, I used an XC GXL Fairmont Ghia Console which was a near perfect fit, it should work in the ute as well.
Cheers Jockster
Cars are my life not just my work

JB

I've got a Vt console in mine, but have had to do a lot of creative artwork with the floor tunnel out of the donor car to have the handbrake and the gear selector fit in the right place. This has also allowed me to put the Vt bucket seats in the car.
Hopefully I will have some pics soon, as at the moment I have lost access to a digital camera.

Cheers
Jason  ;D
Phone +64 223509263

Mooky

Their is a web site that sells full and half consols for FE's I can't remember the site address but I will try and find it for you.  Try using a search engine and type in FE's and consoles

RET

I've got a console from a HK (same car that donated its floor and powerglide) that fits very neatly between the LJ Torana buckets, with maybe an inch either side.  Just enough room to stuff a street directory, or lose your mobile phone ;)

The HK console is just a storage box (ie a half-console?)  In other words it doesn't have a frame that the shifter boot fits into.

cheers
RET
OurCarClub.com.au is a web-based data management application, custom built for car clubs and their volunteer officials. More info...