News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Question regarding wiper pivots

Started by peterwmh, March 26, 2007, 08:42:47 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

peterwmh

March 26, 2007, 08:42:47 AM
Hi all,

I have a pair of wiper pivot spacers that I'm not too sure what they're off.  I know FB EK ones have a small grub screw, these ones don't, could they be FE FC or maybe FX FJ??  Sorry the photo isn't too great  ::)Thanks in advance.  Peter

Never late with a 308!!!!

RET

#1
March 26, 2007, 11:24:37 PM
FE-FC also have the grub screw for fitment of original washer kit.

Do these ones have a part number on them?

cheers
RET
OurCarClub.com.au is a web-based data management application, custom built for car clubs and their volunteer officials. More info...

peterwmh

#2
March 27, 2007, 07:36:37 AM
Thanks RET well that rules out FE FC also!!  Maybe they aren't even from a Holden!!  They don't have a part number on them, in fact they have no writing at all!!  But some further info on them, the hole is 16mm in diameter and has what looks like a locating keyway inside.  The straight base is 30mm across.  Hope that helps with the ID puzzle.

Regards

Peter
Never late with a 308!!!!
Print
Go Up Pages1
User actions