FREE FC BODY SECTIONS.!!!

[fe hotrod]

 ;)Im cutting up a FC body shell all i need is the roof,if any body needs some other bits or sections let me know ASAP cause it will be going to simsmetal soon im in hoppers crossing vic,cheers jamie,0408851404

[SRVLIVES]

hey Jamie,
Could do with the section immediately behind the passenger rear wheel if it's not knackered?

[Rabbitoh]

Jamie,
Is the front subframe assembly (including the front tie member under the radiator) usable?
Also if it is a sedan, I need the boot opening (weatherseal holding) channel.

[NES304]

You didn't happen to keep the rods for the hood lining? If you did can I grab em and the old material (with the rods in it) cheers

[minifcvan]

why do you only need the roof ??? ???(hehehe) sounds like theres a plan going to happen hmmmm....... ::) ::) ::) ::) ::)

[fe hotrod]

 ;)Shane the bit behind the rear wheel,lower quarterpanel has rust,!!!Rabbitoh it didnt come with a subframe as im chasing a good one myself and how much of the seal channel do you need and where??and nes 138 ive pm,d you!!mmmmmm wonder why i would need a fc roof??something a bit different coming up!!i will post some pics, but this is a long term project cheers jamie ;)

[SRVLIVES]

;)Shane the bit behind the rear wheel,lower quarterpanel has rust,!!!

Of course...... had to ask though.

Let me think, two roofs (rooves? ;) ) one car......mmmm, chop, chop mate

[Rabbitoh]

;)Rabbitoh ...... how much of the seal channel do you need and where??;)

Jamie, will let you know the extent I need, tonight.
thanks,

[Just40]

buddy could you cut this bit out on the drivers side,my mate need from the ridge to just past the bolt holes maybe 2 inch past and about 16 inches wide.
but must be drivers side.....

[fe hotrod]

 ;)Just 40 im sorry but i cut through this section as i wanted the pillars then i cut the car in 2 bits right through this section !!it was rust free too,about 1 day too late!!cheers jamie

[Rabbitoh]

Jamie,
I need as much of the 2 sides (along tops of quarter panels) and complete lower edge of the boot seal channel as you can spare (and is not holed through with rust).
Thanks,
R.

[Just40]

it,s all good,he will find one somewhere.
thanks anyway.

[fe hotrod]

 ;)As it stands now unless you live in melbourne and come with your own grinder or gas axe i will not be cutting out any more bits of this shell exept for the blokes that i have said i will,as ive been flooded with requests,and im meant to be on holidays relaxing (yeah right)so because i dont want to send a fc shell all over australia in a thousand patch panels!! this is it!! unless you come yourself!!cheers jamie

[TAYZ]

What can i have ..............LOL

                                                        tayzzzzzzzzzzzzzzzzzz