News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Oil Filter Connection to Grey Motor

Started by graham_fuller, September 14, 2002, 04:41:56 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

graham_fuller

September 14, 2002, 04:41:56 AM
Where does the side pipe get connected as I can't fit it to the oil pressure switch point as I have a Wilsonia fitted there as well? Any clues.
Thanks, Graham

EJ_Dave

#1
September 14, 2002, 05:53:56 AM
Graham,

at the oil pressure sender is the right place to connect. The only solution I can think of is to get another T piece.

David

FE_225

#2
September 14, 2002, 10:40:42 AM
Hi Graham
You can get an adaptor for this. It screws into the oil pressure switch hole and you connect the Wilsonia to the end of the adaptor and the filter hose screws into the side of it. You should be able to get it from Repco.
Hope this helps.
Cheers
Tony
Worried about fuel economy?....Then buy a push bike!

mcl1959

#3
September 14, 2002, 11:26:35 AM
Graham, I've got one of these special T pieces.  It has 3 holes oin it - 1 for the oil sender, one for the Wilsonia and one for the filter.  If you have trouble getting one give me a call.

Ken
Print
Go Up Pages1
User actions