News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Getting your bearings in Mt G.

Started by Glenn 'Stinky' Stankevicius, December 09, 2006, 10:27:41 AM

Previous topic - Next topic

Glenn 'Stinky' Stankevicius

Thanks to satellite imagery on Google maps here's a little  ;D map to give you an idea of what is what.



and a close up of the International. The "T" is the accomodation, the Octagonal roof is the function room? and the separate building is the enclosed pool.

surferboy

Could you please put an X on the map where i will need to go to get some bearings.
and probably some gaskets and some oil and some pistons and some crankshafts and some cylinders and all the other bits that will break or fall off crossing the nullabor. ( but i wont need a timing gear...the mechanic PROMISED me this one will last forever )

 8) 8) 8)
cruisin's great with a 58